John -
Sounds to me like you don't have the dowel bolts on your bell housing.
There are two "dowel bolts," which have a slightly larger diameter shank
and go in the I think the 11 o'clock and 5 o'clock positions or something
like that. These bolts serve to properly center the gearbox with the
engine. Your gearbox is probably off center and binding slightly cocked
with the pilot bushing in the crankshaft, binding the whole thing up.
Regards,
Alan
On Thu, Aug 4, 2011 at 12:11 PM, John Morrison <slomo100@sisna.com> wrote:
> I have a BN7/BT7 transmission that has been taken apart and is now
> reassembled. Problem: When the bell housing is tightened up the trans
> won't go into neutral. If the cap screws are loosened 3/4 turn it will go
> into neutral.
>
> What have we done wrong?
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|