Hi Rick,
I have the Warnerford manifolds - the original type - and they fit without
modifying any metalwork.
http://www.myaustinhealey.com/austin_healey_3000_pics_enginebay.html
The rear carb, with very short ram tubes, is clear of the pedal box
metalwork (if it was LHD)
Warnerford/ redline are now selling a modified version of this manifold, to
reduce the angle to 4 - 5 degrees - but I haven't seen one on a car yet.
http://www.redlineauto.com.au/products/product/12-3013?category=SFISYNBT&;
Best
Chris
On Wed, Jul 6, 2011 at 7:35 AM, Eric (Rick) Wilkins <e-wilkins at cox.net>wrote:
> I have looked around but haven't seen how much modification the pedal box
> of a left hand drive car needs to make three carbs fit. The two setups I
> have would be three SU or three Weber DCOE on the shorter Australian
> manifold.
>
> Can someone here help me with drawings, photos or a good description of
> what's involved?
>
> Thanks,
> Wilko
> San Diego
> ______________________________**_________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/austin.healey@**gmail.com<http://autox.team.net/mailman/options/healeys/austin.healey
> at gmail.com>
|