Send it to Dema for regrinding.
John
64/66BJ8s
http://www.elgincams.com/index.html
On 6/8/2011 4:10 PM, Jonas Payne wrote:
> As noted in an earlier post, my machinist has indicated that my
> camshaft, valves, rocker arm, lifters, pushrods, springs and head are
> all "great".
>
> As always, I have an interest in slightly upgrading performance, and
> have had excellent luck on every other engine I have rebuilt by
> upgrading to a "fast road" type cam and going to oversize valves with a
> good 3 angle valve job.
>
> That said, what is the best option with the camshaft ?
>
> 1. Buy a new fast road one and sell mine?
> 2. Send mine to be re-ground? If so, to whom?
> 3. Exchange mine for the core charge on a re-ground one (seems
> like a loser option if mine is "as new")
>
>
> Jonas Payne
> PBR
> Cell: (702) 358-5084
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|