Ooops.
One word was missing rear license plate _light_ bracket...
So my question should read: what way should the rear license plate light
bracket should go..
Best, Tadek
-----Original Message-----
From: Josef.Eckert at t-systems.com [mailto:Josef.Eckert at t-systems.com]
Sent: Tuesday, May 31, 2011 11:31 AM
To: tadeusz.malkiewicz at gmail.com
Subject: AW: [Healeys] Rear license palte bracket on BN2
Tadek,
Have a look to this picture.
http://www.limora.com/index/lang-1/lkz-176/markenid-1/katnr-1/kat_sprache-2/
hrubnr-17/rubrik-102/tpl-clickable_vertikal.tpl,x-a.htm
It is bolted to the shroud.
BR Josef
-----Urspr|ngliche Nachricht-----
Von: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
Im Auftrag von Tadeusz Malkiewicz
Gesendet: Dienstag, 31. Mai 2011 09:42
An: 'Alan Seigrist'; healeys at autox.team.net
Betreff: Re: [Healeys] Rear license palte bracket on BN2
Alan, does it bolt to the bumper or the shroud??
And which way??.. Which side faces the license plate light & which side goes
up??..
BR, Tadek
-----Original Message-----
From: Alan Seigrist [mailto:healey.nut at gmail.com]
Sent: Tuesday, May 31, 2011 9:14 AM
To: Tadeusz Malkiewicz; healeys at autox.team.net
Subject: Re: [Healeys] Rear license palte bracket on BN2
The bracket actually bolts to the bottom of the shroud under the bumper so
that the hidden license plate light can shine on it.
On 5/31/11, Tadeusz Malkiewicz <tadeusz.malkiewicz at gmail.com> wrote:
> Hello,
>
> I have the rear license plate bracket, but I am not sure which way to
mount
> it - there are actually 4 ways to do it.
>
> Also, did the connectors sit on the outside of the car or the inside?
>
> Best, Tadek
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html Suggested annual donation
> $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>
--
Sent from my mobile device
[demime 1.01d removed an attachment of type image/jpeg which had a name of
License plate light bracket 1.JPG]
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/josef.eckert at t-systems.com
|