Hi tadek -
The rear bumper fits with the two captive nut mounts on the bottom.
Then this bracket mounts to the captive nuts. The license plate light
then mounts on top of the bracket, facing rearward. It faces back and
slightly downward, shining on the license plate mounted on the lower
shroud.
All in all a very elegant and clean solution using old clunky 50s technology....
Alan
On 5/31/11, Tadeusz Malkiewicz <tadeusz.malkiewicz@gmail.com> wrote:
> Alan, does it bolt to the bumper or the shroud??
>
> And which way??.. Which side faces the license plate light & which side goes
> up??..
>
> BR, Tadek
>
> -----Original Message-----
> From: Alan Seigrist [mailto:healey.nut@gmail.com]
> Sent: Tuesday, May 31, 2011 9:14 AM
> To: Tadeusz Malkiewicz; healeys@autox.team.net
> Subject: Re: [Healeys] Rear license palte bracket on BN2
>
> The bracket actually bolts to the bottom of the shroud under the
> bumper so that the hidden license plate light can shine on it.
>
> On 5/31/11, Tadeusz Malkiewicz <tadeusz.malkiewicz@gmail.com> wrote:
>> Hello,
>>
>> I have the rear license plate bracket, but I am not sure which way to
> mount
>> it - there are actually 4 ways to do it.
>>
>> Also, did the connectors sit on the outside of the car or the inside?
>>
>> Best, Tadek
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>
>
> --
> Sent from my mobile device
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|