Re: [Healeys] Dual fuel pumps

["Tracy Drummond" <bighealey@charter.net>]

I use two facet pumps back to back in series mounted on standoffs with
rubber bushings to reduce vibration.

  I have a three way toggle (on-off-on).  I use a few elbow fittings to make
it easier to connect the very short run between pumps.

In from tank >pump1>pump2> to carbs

I have used the secondary pump to temporarily fix another friends  car out
on tour.  Never needed to use it on my car.

Warm Regards,
 
Tracy Drummond
 
PMP | ITIL Service Manager | CISSP | bighealey@charter.net | 408-394-3444
cell | 408-776-0133 home | http://www.linkedin.com/in/tracydrummond
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of keith taylor
Sent: Friday, April 15, 2011 4:13 PM
To: healeys
Subject: [Healeys] Dual fuel pumps

I propose fitting a secondary pump to a BN2 (neg earth)  using an SU +
Fedtro with a changeover switch The simple option is to run them in series .
Is there any reason not to do this.ie loss of pressure etc

Keith Taylor
WAMBERAL OZ
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey@charter.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums