I had one Powder coated and did not have any problem with warp. I did
have a problem with the PC shop who could not get the whole assembly up
to the correct temp and some of the PC was not good. I now use another
IN based PC company. Crown Powder Coatings of Fortville, IN .
-----Original Message-----
From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net] On Behalf Of john spaur
Sent: Friday, November 26, 2010 10:10 PM
To: healeys@autox.team.net
Subject: [Healeys] Axle casing powder coat
Does anyone have experience with powder coating the axle casing.
I am wondering if it will warp and cause problems with the differential
seal?
Same issue with the axle bearing hub assembly.
Should I be worried about warpage?
Thank you,
John Spaur
'62 BT7
BTW, I completely disassembled the rear axle and brake plates today!
I have a new (for seven years) Lempert differential on my workbench.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jimf@frakes-eng.com
CONFIDENTIALITY NOTICE
The information contained in this e-mail is intended only for the use of the
individual or entity to which it is addressed and it may contain information
that is privileged or confidential. If the reader of this message is not the
intended recipient (or the employee or agent responsible to deliver it to the
intended recipient), you are hereby notified that any dissemination,
distribution, or copying of this communication is prohibited. If you have
received this e-mail in error, please notify us by telephone at the number
listed above or by return e-mail.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|