Hi John, never had a rear axle casing powder coated, but to adjust the
camber and castor in a rear banjo you need a serious press, and
serious localised heat.
I doubt powder coating would bend anything.
Chris
Sent from my iPhone
On 27/11/2010, at 2:10 PM, john spaur <jmsdarch@sbcglobal.net> wrote:
> Does anyone have experience with powder coating the axle casing.
>
> I am wondering if it will warp and cause problems with the
> differential seal?
>
> Same issue with the axle bearing hub assembly.
>
> Should I be worried about warpage?
>
> Thank you,
>
> John Spaur
> '62 BT7
>
> BTW, I completely disassembled the rear axle and brake plates today!
> I have a new (for seven years) Lempert differential on my workbench.
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|