Thanks Perry, this information is very helpful!
At 03:14 AM 10/6/2010 -0400, healeyguy@aol.com wrote:
>John
>Just measured a set of original bushings ...they are just 0.875
>long.... Theoretically there is a slight gap between
>the bushings when assembled using original parts. Suggest a slight trim with a
>grinder to get the 0.901 bushings just a bit shorter. Easy to do.
>Aloha
>Perry
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|