For something completely different, on both customers cars we are currently
assembling, we plan to install completely stock H4 carbs and air filters set
up, plain bonnet with no louvers, etc. Nothing extra to buy, fit or bend.
Should be a rare contrast to what everybody else is doing these days.
Rich
--------------------------------------------------
From: "Josi Vicente Vargas" <jvvmusme@yahoo.com>
Sent: Friday, September 17, 2010 5:43 PM
To: <healeys@autox.team.net>
Subject: [Healeys] BN2: Cold Air Box fitting
> I plan to install an Air Cold Box in my BN2 with a Dennis Welch Cilinder
> Head,
> H6 Carbs and a heath Shield. I have heard that I must alter a frame piece
> in
> order to foi but I do not know what I have to do. Please help !!!!
>
> Tadek
> mentions it in his email.... Does anyone have pictures of the altered
> piece
> in the frame . All help is welcomed because Tadek , in Poland, is also in
> the
> same problem....and Jose, in Colombia, is going to have the same problem
> in
> a
> few months....
>
>
> Thanks,
>
> Jose
> Josi Vicente Vargas
> Musmi
>
>
> Tel. (571) 321
> 3740
> Cel. (57) 311 288 3401
> Skype: jovivago
>
>
> www.musme.net
>
>
> Bogota, Colombia
> ________________________________
> From: Tadeusz Malkiewicz
> <tadeusz.malkiewicz@plusnet.pl>
> To: healeys@autox.team.net
> Sent: Fri,
> September 17, 2010 4:32:33 PM
> Subject: Re: [Healeys] thickness of phenolic
> spacers for 100 LeMans carburettor
> setup
> ________________________________________
> From: Tadeusz Malkiewicz
> [mailto:Tadeusz.Malkiewicz@plusnet.pl]
> Sent: Friday, September 17, 2010 11:24
> PM
> To: 'Jim LeBlanc'; 'I Erbs'; 'Curt/Nancy Arndt'
> Cc:
> 'healeys@autox.team.net'
> Subject: RE: [Healeys] thickness of phenolic spacers
> for 100 LeMans
> carburettor setup
>
> Thatbs precisely the problem b:
>
> When
> assembling the carbs I noticed that:
> - the extra heat shield (I got from
> Denis Welch) does not fit properly
> without touching the manifold unless you
> stack 2 phenolic washers
> - even if I install just one thick phenolic washer I
> cannot get the cold air
> box as it does not clear the knocked frame pieceb&
> Itbs a bit of a catch 22 situation..
>
>
> Tadek
> _______________________________________________
> Healeys@autox.team.net
> Donate:
> http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive:
> http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jvvmusme@yahoo.com
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|