I plan to install an Air Cold Box in my BN2 with a Dennis Welch Cilinder Head,
H6 Carbs and a heath Shield. I have heard that I must alter a frame piece in
order to foi but I do not know what I have to do. Please help !!!!
Tadek
mentions it in his email.... Does anyone have pictures of the altered
piece
in the frame . All help is welcomed because Tadek , in Poland, is also in
the
same problem....and Jose, in Colombia, is going to have the same problem in
a
few months....
Thanks,
Jose
Josi Vicente Vargas
Musmi
Tel. (571) 321
3740
Cel. (57) 311 288 3401
Skype: jovivago
www.musme.net
Bogota, Colombia
________________________________
From: Tadeusz Malkiewicz
<tadeusz.malkiewicz@plusnet.pl>
To: healeys@autox.team.net
Sent: Fri,
September 17, 2010 4:32:33 PM
Subject: Re: [Healeys] thickness of phenolic
spacers for 100 LeMans carburettor
setup
________________________________________
From: Tadeusz Malkiewicz
[mailto:Tadeusz.Malkiewicz@plusnet.pl]
Sent: Friday, September 17, 2010 11:24
PM
To: 'Jim LeBlanc'; 'I Erbs'; 'Curt/Nancy Arndt'
Cc:
'healeys@autox.team.net'
Subject: RE: [Healeys] thickness of phenolic spacers
for 100 LeMans
carburettor setup
Thatbs precisely the problem b:
When
assembling the carbs I noticed that:
- the extra heat shield (I got from
Denis Welch) does not fit properly
without touching the manifold unless you
stack 2 phenolic washers
- even if I install just one thick phenolic washer I
cannot get the cold air
box as it does not clear the knocked frame pieceb&
Itbs a bit of a catch 22 situation..
Tadek
_______________________________________________
Healeys@autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|