good advice. As stated a previous post ( last month or so I had the
radiator cleaned out and recored last year. It was only when I pulled it as
part of my resto, did I see how I got ripped off and sent it out for proper
recore.
I think I can borrow something, and will wait until it starts again,
cheers
2010/7/31 Oudesluys <coudesluijs@chello.nl>
> You should have flushed the engine before you send the raded in a previous
> postiator away. Try getting hold of an old radiator, any radiator that will
> appr. fit. Fill up with water and caustic soda or one of the products you
> can buy in the auto store, and let the engine run for an hour or so. Drain
> the system, remove the radiator and connect a water hose to the water pump
> outlet to a hot water tap, then back flush the engine thoroughly with a
> strong flow.
> This will get the loosened debris out of the engine instead of in your new
> shiny recored radiator and blocking it.
> Kees Oudesluijs
> NL
>
>
>
> My radiator is out, just got back from being recored. Manifolds are off
>> too. Is there anyway to flush the engine, or do I wait for it to be running
>> again and then flush it?
>>
>> I Erbs
>> Sent from my iPod
>>
>> On Jul 31, 2010, at 8:57 AM, "John Sims" <ahbn6@verizon.net> wrote:
>>
>>
>
--
Ira Erbs
Portland, OR
_______ _______
(______ \____1960 BT7____/ _______)
(_________________________)
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|