John -
Did you put the plastic rotor on the dist. cam?
Also, check your timing, I notice sometimes these kits put timing off
by as much as 30 deg, so you need to re-time the ignition, that should
fix it.
On 4/11/10, john doe <rccpl1@yahoo.com> wrote:
> To all the guru's out there i have a bj8 with a mallory dual point dist the
> car is neg ground and i purchased a pertronics 11 ignition kit .The
> instructions seem simple enough but i can't get the car to start.there's a
> module on the side of the dist i don't know if thats a condenser or a
> ballast do i attach it now and were to anyone done this thanks
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|