Mark,
I had this issue when restoring my BN7 some time ago. To take care of the slop
in the slot of the long tube I welded two new spots on the short tube in the
same location as the orig. Then with careful use of a Dremel and numerous
trial and error fits I got a nice fit of one tube in the other and no rotation
of the traf.
Hope this helps
Keith Pennell
---- Mark LaPierre <lapierrem@sbcglobal.net> wrote:
> I just recently reinstalled my rebuilt trafficator in my car and noticed that
> it turns with the steering
> wheel about an inch then stops as normal. This happens when turning the
> wheel either way. Is there an adjustment to get the trafficator to just stay
> in one position at all times or is a small amount of movement like this,
> normal.
>
> Thanks, Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|