Mark,
The symptoms you describe almost certainly indicate that the machined slot
in the top end (steering wheel end) of the long stator tube has widened,
allowing excessive rotaotion of the entire switch head. As Bob described,
the base of the slot is very crack prone, which makes the condition worse.
New stator tubes are available though they usually need a bit of careful
file dressing of the milled slot to allow a good smoth fit of everything.
Rich Chrysler
----- Original Message -----
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
To: <healeys@Autox.Team.Net>
Sent: Saturday, December 05, 2009 11:39 PM
Subject: [Healeys] Trafficator Movement
>I just recently reinstalled my rebuilt trafficator in my car and noticed
>that
> it turns with the steering
> wheel about an inch then stops as normal. This happens when turning the
> wheel either way. Is there an adjustment to get the trafficator to just
> stay
> in one position at all times or is a small amount of movement like this,
> normal.
>
> Thanks, Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|