I'm doing a ground up restoration on a 1959 BN7. Have a problem w/ a carb
float that is stuck in the down position. This car must have sat for many
years. There is evidence of water in many places in the carbs. Can someone
suggest how to get this float loose? I am thinking of drilling 2 holes and
jamming a needle nose pliers into the holes and trying to twist it loose.
John Snyder
1959 BN7
1960 BT7
1961 BN7 MK2
1962 BT7 MK2
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|