AFAIAC no mods are needed if you use all new parts. If you use an
existing MBC that was used in a system with DOT4 replace the rubber
seals with new ones, not NOS as they may still contain natural rubber.
Kees Oudesluijs
NL
Thomas Willig schreef:
> Oh, my god,
>
> I think I triggered a discussion, that I thought was long ended.
>
> I have replaced ALL parts of the 100's braking system with brandnew
> stuff. I am using silicone b.-fluid since 15 years on all my cars.
> Fantastic stuff..
>
> BUT:
> My question is which precise modifications are advisable to the interior
> parts of the 100's mastercylinder. Please check this article from the
> archives...:
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|