Mark,
I think Rich got all your questions, but FYI, the thin bottom panel that
goes on the bottom of the door pocket is actually attached to the lower door
pocket panel on my BT7. These are the original door pocket panels. The
attachment is just with the vinyl covering, which acts as a hinge, so I
would suggest that the 3" of vinyl you have hanging off the bottom is for
the thin narrow panel and that this panel was originally glued to that
"extra" vinyl. Does that make sense?
I only have experience with my car so others such as Rich or Peter Svilans
will know better if this is how they all are.
I concur with Rich that you have to bow that top panel a fair bit to get the
thing sprung into place - be careful not to break it!
Cheers,
Mirek
----- Original Message -----
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
To: <healeys@Autox.Team.Net>
Sent: Sunday, August 30, 2009 11:13 PM
Subject: [Healeys] Heritage Panel Install
>
> - My lower pocket panel has 3 inches of extra vinyl hanging on it. Does
> this
> just get glued
> to the back of the panel or does it lay flat in the door bottom under the
> thin narrow panel
> that goes in the bottom of the door.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|