Mal -
Those part numbers are of no use. They are just the SU part numbers for the
pump body itself, but not the pump. I would suggest just replacing the
condenser / diode, then by default you will know what polarity the pump is.
Alan
'52 A90
'53 BN1
'64 BJ8
On Mon, Aug 31, 2009 at 11:10 PM, Mal Bruce <mbruce6@cogeco.ca> wrote:
> I have four fuel pumps, three are AUB 662-1 and the other is AUB 662. Since
> the pumps have all been used at one time or another on both MGC and BJ8,
> negative and positive ground respectively, how do I find the polarity.
> Thanks
> in advance for the help.
>
> Mal
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|