Fellow Healeyoids,
I'm having a difficult time trying to find out where these little green
panel clips go on my 63 BJ7. I'm in the middle of putting the Heritage door
panels on and I have the inner door panel on first now I need to put the
outer panel on. I have a plastic bag of about 18 little green clips, the
book calls them cup retainers or something like that. Anyway, I have maybe
one or two holes on the lower part of the door that would even fit a clip.
There are NO other holes on my door that would hold the clip. I thought
that the outer panel was screwed to the door with little #6 or #8 screws and
cup washers anyway??????
Also, I got my weather-stripping attached for the door. Prior to attaching
the strip, I did have the door opening and closing smooth as butter and gaps
looking very good. Now everything looks like sh*t. I have to slam the door
t get it to latch. I have monkeyed around with the latch position and bent
the little metal flange that hold the weather-strip inward. It is very
slightly better but still looks like hell and I have to slam and push on the
door. The weather-strip does not appear to be binding anywhere. Thanks in
advance!
Randy
Healey-Archaeologist
63 BJ7
60 BT7
66 Cobra replica
06 Mini Cooper S
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|