If anyone needs one, I have a bramd new left side shock mount plate made in
Australia. VERY nice, that I don't need. If interested in it, contact me off
line.
Thanks
tom
>
> From: "Tracy Drummond" <bighealey@charter.net>
> Date: 2008/06/08 Sun AM 10:56:23 EDT
> To: "'James Shope'" <healeymanjim@hansencc.net>, "'healeys'"
> <healeys@autox.team.net>
> Subject: Re: [Healeys] shock towers
>
> James,
>
> Here is a photo essay of how I did it. I did not remove the steering
> column.
>
> http://healey.org/content/view/366/168/
>
> Tracy Drummond Gang Warily !
> President AHCUSA www.healey.org
>
> -----Original Message-----
> From: healeys-bounces+bighealey=charter.net@autox.team.net
> [mailto:healeys-bounces+bighealey=charter.net@autox.team.net] On Behalf Of
> James Shope
> Sent: Saturday, June 07, 2008 9:03 PM
> To: healeys
> Subject: [Healeys] shock towers
>
> checked the archives but no luck. i am trying to determine the best way to
> remove the old shock tower plate on a bj7 which is kaputt. it is on the
> driver side and i assume you have to remove the steering gear. do you cold
> chisel or grind it off. i am also assuming the new shock plates have the
> captive nuts welded in already. we are going to have a mobile welding guy
> come by to weld the new plate. what do i need to tell him about making sure
> everything is in the exact place and how critical it is, etc.,
> healeymanjim
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bighealey@charter.net
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as tomfelts@windstream.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|