James,
Here is a photo essay of how I did it. I did not remove the steering
column.
http://healey.org/content/view/366/168/
Tracy Drummond Gang Warily !
President AHCUSA www.healey.org
-----Original Message-----
From: healeys-bounces+bighealey=charter.net@autox.team.net
[mailto:healeys-bounces+bighealey=charter.net@autox.team.net] On Behalf Of
James Shope
Sent: Saturday, June 07, 2008 9:03 PM
To: healeys
Subject: [Healeys] shock towers
checked the archives but no luck. i am trying to determine the best way to
remove the old shock tower plate on a bj7 which is kaputt. it is on the
driver side and i assume you have to remove the steering gear. do you cold
chisel or grind it off. i am also assuming the new shock plates have the
captive nuts welded in already. we are going to have a mobile welding guy
come by to weld the new plate. what do i need to tell him about making sure
everything is in the exact place and how critical it is, etc.,
healeymanjim
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as bighealey@charter.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|