Alan
Sorry but I have to disagree. A BN2 should be 1" all round. It is the
later BN1s with the hypoid, 5 stud rear axle and 2 1/4" wide read brakes
that need the 7/8" diameter front wheel cylinders.
A BN2 has 2 1/4" wide drums front and back.
Regards
>
>For the BN2 7/8" is original but some swear that the 1" used on BN1s
>gives a better brake distribution given that the BN2s rear brakes are
>actually bigger than the front brakes..
>
>Alan
>
>
>
>On 5/5/08, Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl> wrote:
>> I have a quick question - what should be the size of the front wheel
>> cylinders? The PO had an interesting variety installed: lest wheel 2x1",
>> right wheel 1x1" and 1x7/8"...
>>
>> If I have to change them all, who is selling the best replacements? Is
>> Girling still available?
>>
>>
>> Many thanks for help,
>>
>> Tadek
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as healey.nut@gmail.com
>>
>> http://www.team.net/archive
>>
>
>
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|