We have a set of castor wheels on a 1/2 square tube frame that we
attach to the rear shock mounts and the front bumper bracket
attachment point. We have castor wheels on the front and straight
wheels on the rear. These stay on the car until the drive train is
ready to install so we can move the chassis anywhere we want to in
the shop.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Apr 16, 2008, at 7:30 PM, john spaur wrote:
> Hello Listers!!
>
> I need to know if this is a good idea or a bad idea.
>
> My BT7 is stripped down to the frame and chassis. I need to move it
> in and out of the garage and I thought about temporally lashing the
> axle housing (with wheel attached) to the frame and using that to
> help roll it out of the garage. The only problem is that the frame
> will rest on the axle housing and I am wondering if that will bend it
> (I think not).
>
> TIA,
> John
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|