Hello Listers!!
I need to know if this is a good idea or a bad idea.
My BT7 is stripped down to the frame and chassis. I need to move it
in and out of the garage and I thought about temporally lashing the
axle housing (with wheel attached) to the frame and using that to
help roll it out of the garage. The only problem is that the frame
will rest on the axle housing and I am wondering if that will bend it
(I think not).
TIA,
John
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|