| To: | Stephen Hutchings <s.hutchings@rogers.com> |
|---|---|
| Subject: | Re: [Healeys] Timing gear removal |
| From: | John Loftus <loftusdesign@cox.net> |
| Date: | Thu, 15 Nov 2007 11:26:12 -0800 |
Hi Stephen, I took a cheap 6" Three-Jaw puller from Harbor Freight and ground down the back side of the puller hooks so they would slide behind the gear. The grinding was required to use this puller on the larger cam gear but should work on the crank gear too. Cheers, John _______________________________________________ Support Team.Net http://www.team.net/donate.html Healeys@autox.team.net http://autox.team.net/mailman/listinfo/healeys |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Healeys] Conversion of BN1 Frame to BN2, William Berg |
|---|---|
| Next by Date: | [Healeys] Brake Master Cylinder, STOCKLAND |
| Previous by Thread: | [Healeys] Timing gear removal, Stephen Hutchings |
| Next by Thread: | Re: [Healeys] Timing gear removal, john spaur |
| Indexes: | [Date] [Thread] [Top] [All Lists] |