healeys
[Top] [All Lists]

[Healeys] Timing gear removal

To: healeys@autox.team.net
Subject: [Healeys] Timing gear removal
From: Stephen Hutchings <s.hutchings@rogers.com>
Date: Wed, 14 Nov 2007 14:36:50 -0500
I'm removing the gears and chain from my engine in preparation for 
taking out the cam (not a rebuild, I just have to get the cam out) , 
and I'm having trouble with the crank gear. I've got the perfect 
little two legged puller which has just begun to move the cam gear, 
but the crank one is more stubborn. I wondered if anyone may have a 
trick here, because I don't want to put much lateral force on the 
chain, but there is very little room behind this gear for leverage. 
The manual's suggestion of two screw drivers at 180 degrees to one 
another is not working for me.

Thanks,
Stephen, BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>