No wait, I am mistaken, I think that is the righ size, sorry, I need to
check more sources!
Alan
On 10/28/06, Alan Seigrist Blue 100 <healey.nut@gmail.com> wrote:
>
> James -
>
> If I'm not mistaken, the 7/8" bore is for the servo assisted brakes on a
> BJ8. Sounds to me like that's your problem. I've been there and the
> problem you describe is exactly the same as what I experienced.
>
> Alan
>
>
> On 10/28/06, James Lea <clocks@midcoast.com> wrote:
> >
> > Well I'm finally out of the sick bed and had a chance to check the
> > master
> > cylinder today. It is Aluminum and 7/8" in diameter. From the advice on
> > the
> > list that sounds to me like the correct part so I will try to bleed some
> > more air out of it and see if that helps. This will be the fourth time I
> > have bled it and right now there is essentially no peddle at all. If you
> >
> > start the car in second with the peddle to the floor it will still creep
> > forward. Thanks for all the help. JL
> >
> > James Lea
> > PO Box 25
> > Rockport Maine 04856
> > 1-207-236-3632
> >
> > 1952 MG TD
> > 1952 Triumph Mayflower
> > 1958 Rover P4
> > 1962 Austin Healey BT7
|