Just to try it out, I brought my tattered old factory Workshop Manual to the
office to see how hard it would be to scan. When I did it I noticed that
there isn't a section I, and when I refer to the index, it's not listed.
Why did they skip "I"?
Patton
On 9/14/06, Patton Dickson <57healey@gmail.com> wrote:
>
> Aren't there copyright concerns on these, especially with Haynes as
> they are still in business.
>
> I could scan the entire factory manual to pd with the copier I have
> at the office if copyrights aren't and issue.
>
> Patton
>
> On 9/14/06, dcong996@earthlink.net <dcong996@earthlink.net> wrote:
> > I have a copy that I bought on disk, which is PDF format, about 110,000
> KB.
> > It is a copy of the Haynes Manual 1974 reprint.
> > It covers all 100-6 and all 3000 models. It is very similar to the
> factory
> > manual. Convenient to use on the computer and to print individual pages
> or
> > drawings to use in the shop.
> > I paid about $10 for the disc on eBay, and it is well worth it.
> >
> > Dallas
> > 1967 BJ8
> > 1953 MGTD
> >
>
>
> --
> Patton Dickson - http://Austin-Healeys.com/
>
--
Patton Dickson - http://Austin-Healeys.com/
|