Dan,
Had this problem with a friend's car. The new needle valve would hang
up. We still had the solid brass needle valves so replaced the new
plastic/brass type with the originals and the problem was solved.
Appears that the new needle valves stick.
Alan
67BJ8
Dan Serrao wrote:
>I have a 63 BJ7 with HS6 carbs. My problem is that the needle in the float
>chamber keeps getting stuck causing the chamber to flood and run out the
>overflow pipe. The carbs were just rebuilt. I took the cover off and freed up
>the needle and it worked fine for about 20 miles. Anyone had this same
>problem??
|