Ray,
Martin MacGregor makes these rubber sealing diaphragms in a kit complete
with the rivets and washers.
Rich Chrysler
----- Original Message -----
From: "Ray Juncal" <gonzo18@mindspring.com>
To: "Healey list" <healeys@autox.team.net>
Sent: Friday, July 21, 2006 3:17 AM
Subject: Rubber skirt and caulking
> List
> On the removable panel of the fire wall above the bellhousing there is
> a
> rubber skirt held on with split rivets and washers. I need to make a new
> one.
> Can anyone tell me where I might find a suitable material. It is a
> rubberized
> cloth about 1/16" thick.
> I would also like some list input on what type of caulking to use to
> seal
> panel joints and so forth. I will be painting over the caulking but the
> car
> will be black so I'm looking for black caulk. Would I use this same stuff
> between the front shroud and the sub frame or is some other material
> recommended for this?
> Regards
> Ray Juncal
|