Alan, do you have an opinion on which system, the Bell, the Falcon, or the
mild steel Moss muffler is quieter?
Ron Fine
----- Original Message -----
From: "Alan Seigrist Blue 100" <healey.nut@gmail.com>
To: "John Snyder" <helyjohn@cablespeed.com>
Cc: <healeys@autox.team.net>
Sent: Thursday, July 20, 2006 6:35 PM
Subject: Re: SS muffler
> Hi John -
>
> AH Spares sells the system piece by piece. They sell systems made by
> "Bell"
> which is MUCH better than the systems made by "Falcon" which is sold by
> Moss. The part number is EXS127 :
>
> http://www.ahspares.co.uk/en/products/default.aspx
>
> Go to that link and select exhasut systems, you'll see it there.
>
> You can also by the Falcon SS mufler direct from SC Parts (they contract
> directly with the manufacturer):
>
>
>http://www.scparts.co.uk/index/lang-2/lkz-195/markenid-1/katnr-1/kat_sprache-2/hrubnr-10/rubrik-49/index.php?tpl=clickable_vertikal.tpl&teil=5&kat_id=3884&artikelnr=22834&artikeldetailtop=120
>
> SC Part number 22834 = 41 Pounds. Of course this is less than half the
> price of AH Spares Bell system, so if you are price sensitive you can just
> get this one. Once you calculate in shipping, the Falcon muffler will
> probably cost you about $100 a piece.
>
> I think they should fit up to your mild steel pipes, but just a warning,
> they may not fit up exactly. You may have to play around with it a bit to
> mate up SS and MS pipes.
>
> Best Regards,
>
> Alan
>
> '53 BN1
> '53 A90
> '64 BJ8
|