Horn / Turn Signal Harness Main Harness
Horn Ground Purple with Black
Turn Signal Power Green with Brown
Right Turn Signal Green with White (2)
Left Turn Signal Green with Red (2)
GSFuqua1@aol.com wrote:
> You know, after you have done several you think you have things sorted to
> some degree but then along comes the electrical gremlins and total
>exasperation.
>
> I just rewired an early model BJ8 (64) and can't get the turn signals to hook
> up correctly. I have gone back over the wiring several times checking to
> make sure colors are correct etc. Everything looks good until I get to the
>wires
> coming out of the main harness and the ones coming out of the new
> trafficator. No matches. I have the brown with black from the trafficator
>going to the
> purple with black from the harness. That is the horn. From there it is
> straight down hill. From the trafficator I have a green with white stripe
>and a
> green with red stripe. I am assuming they just plug directly into their
> corresponding counterparts on each turn signal. That leaves me with a green
>with
> brown coming out of the trafficator and 3 wires from the harness. A green
>wire
> (Hot), a green with yellow and a green with blue. No matches. What am I
> missing here??
>
> Going crazy in Branson,
>
> Gary
|