Tach WAS high

[Dave Carpenter <d.carpenter7@verizon.net>]

I had asked a while back about my tach reading way high. Through the 
answers I got, I used Jim Werner's healey pages and the short fix on there.

http://hometown.aol.com/bgahc/01_jwha_tachreadshigh.html

The capacitor inside must have been shot, because the new one from Radio 
Shack has fixed it. I drilled the hole in back and calibrated it as 
described and it now reads the same as my analyzer tach readings in 
various rpm ranges up to 4000 or so. Mission accompished.

Thanks
Dave
67 BJ8
60 BT7 (in pieces)