In general I don't send messages from non-members on to the list, but
this seems like a legitimate, well founded request for assistance.Â
Perhaps some of you can assist Chris on this matter.
mjb.
On 11/15/19 6:14 AM, chris panayotti via Fot wrote:
> Hi all,
>
> I ran across an archive on your site from a Robert Lang, looks like
> from December last year. So Taking a total shot in the dark emailing
> this. Anyway in the thread he talks about running triple DCOEs on a
> Canon manafold on a TR6 with stock cam and stock compression. I am
> trying to do the exact same. He mentioned toward the end that he would
> be willing to share knowledge on the jets and knowledge.
>
> So here it goes, the main symptom I am running into currently is
> accleration off idle. It starts up and idles pretty good with mixture
> screws all out about 1.25 turns. But bumping the throttle at that
> point either load or no load bogs bigtime, bassically kills the engine
> if I hold it, even if I go very slowly. I did manage to get it to a
> point where it revs so so if I keep bumping it fast with no load, but
> with any load at all it bogs and dies. I've come to the conclusion my
> progression circuit is to blame and that operates off the idle jet, of
> which all are currently 50F11.
>
> I've gone over all the valve timing with a fine toothed comb and
> verified a stock cam by checking the lift. All valve gaps are perfect
> At .010". I removed the vacuum retard from the distributor and am
> running it at 12deg BTDC right now, and the mechanical advance does
> work and brings it up to 24ish deg. It is a stock points distributor
> by the way. I've read a few people mention that I need to upgrade
> that but others have successfully used it also. I've checked
> compression all are close and above 125psi.
>
> Any help or insight would be GREATLY appreciated. I've been trying to
> get this to run right for weeks. I keep crossing things off the list
> but still haven't gotten it right. I'm still concerned about the
> distributor but it seems well enough that it should run properly. I'm
> fairly confident it's a carb problem.
>
> If you need any more info about my setup please ask
>
> Thank you
> Chris Panayotti
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|