Viton Seal Kits by Chris Marx.
I have a few on the shelf and will have lowest price in the world. No centering
tools left.
Regards. Joe A
Sent from my iPhone
> On Sep 2, 2018, at 9:46 AM, Phil Gott via Fot <fot at autox.team.net> wrote:
>
> Ray;
> The car has no seal at the reAr main. It uses an oil slinger to throw most of
> the oil into a catch device which routes it back to the pan. Some oil will
> get past that, but it should be no more than a few drips.
> Joe Alexander (gasket innovations) markets a German made modern seal to fix
> that, but you need to pull the engine and lower the crank a couple of inches
> to install it. While you are doing that a new front seal, timing chain and
> tensioner and a set of main and rod bearings would be a good idea.
> I am in Princeton, Mass if you want to get together. I can show you how all
> this goes together.
> Phil Gott
> TR4a
>
> Sent from my iPhone
>
>> On Sep 2, 2018, at 12:07 PM, Ray Desanti via NET <net at
>> newenglandtriumphs.org> wrote:
>>
>> I recently purchased a 1959 TR3A. The more I drive the more it leaks from I
>> assume the
>> Rear main seal
>> I?m wondering what to do to next
>> I live in central mass are there mechanics locally that will help me with
>> this
>> Thanks RayD Worcester Ma
>>
>> Sent from my iPad
>> _______________________________________________
>> NET mailing list
>> NET at newenglandtriumphs.org
>> http://newenglandtriumphs.org/mailman/listinfo/net_newenglandtriumphs.org
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/joealexandervintage at gmail.com
>
>
|