I put in Holley Blues (7 psi) and it just did not seem to work as well, even
though at the carb I only need about 2? psi. So I put in Reds (15 psi) and they
work fine.
Fuel pumps are in the trunk at the cell (2 of them because I have 2 pickups in
the cell, one at each rear corner). Then I have the Holley regulator up[ front
just before the carbs, also a fuel pressure gauge ? more than 2? psi would
overpower the SU carbs.
--Rocky Entriken
HP Spitfire Mk. I
From: Bob Totten via Fot
Sent: Saturday, August 25, 2018 5:21 PM
To: fot at autox.team.net
Subject: [Fot] Red of Blue Electric Fuel Pump
Question for the masses ... what is the flow rate and pressure for the
Purolator blue pump ( part number 42 S ) ?? I know the red pump ( part number
12 S ) is rated at 35 gph / 4 - 7 psi .
This would be used on my race spit.
Thanks in advance,
Bob T.
--------------------------------------------------------------------------------
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/pipermail/fot
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180826/0afbf372/attachment.html>
|