You would also need a known precision calibrating ring. They are available on
eBay. Get one very close to whatever diameter you are measuring.
MDunst Headgasket.com 626.358.1616
Fax 626.628.3777
Triple R Munitions, Inc 626.201.9471
T FFL 6,7 SOT 2
On Thursday, June 28, 2018, Bill Tobin via Fot <fot at autox.team.net> wrote:
Ronnie, I have a nice used Sterrett 84 111 5 with the original wooden box and
extra attachments. Starrett will sell you one for about $950! I'll sell you
this one for WAY less than that. Give me a call at 814 398-2908. Cheers, Bill
----- Original Message ----- From: "rbtr3a--- via Fot" <fot at autox.team.net>
To: <fot at autox.team.net> Sent: Thursday, June 28, 2018 9:31 AM Subject:
[Fot] Bore gauge > > You engine builders I have a question? > I?m looking for a
bore gauge. > I know mityotoyo and Starret are the bench marks. But looking for
opinions > on other less expensive brands. > Ronnie >
_______________________________________________ > fot at autox.team.net > >
http://www.fot-racing.com > > Donate: http://www.team.net/donate.html >
Archive: http://www.team.net/pipermail/fot > Unsubscribe/Manage: >
http://autox.team.net/mailman/options/fot/william.tobin31 at verizon.net > > >
_______________________________________________ fot at autox.team.net
http://www.fot-racing.com Donate: http://www.team.net/donate.html Archive:
http://www.team.net/pipermail/fot Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/gasket.works at gte.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180628/92fa2310/attachment.html>
|