I agree with Mordy but will add even with a top quality tool you still need to
practice with it until you can repeat the result consistently.
jim g
> On June 28, 2018 at 10:00 AM Mordy Dunst via Fot <fot at autox.team.net>
> wrote:
>
> Machine shops are saavy and have the stuff. They could do it for you.
>
> Or
>
> ?Buy good stuff once and cry once? . Repeatable accuracy is critical.
>
> MDunsthttp://Headgasket.com 626.358.1616
> Fax 626.628.3777
> Triple R Munitions, Inc 626.201.9471
> T FFL 6,7 SOT 2
>
> On Thursday, June 28, 2018, rbtr3a--- via Fot < fot at autox.team.net
> mailto:fot at autox.team.net > wrote:
>
>
> > > You engine builders I have a question? I?m looking for a bore
> gauge. I know mityotoyo and Starret are the bench marks. But looking for
> opinions on other less expensive brands. Ronnie
> _______________________________________________ fot at autox.team.net
> mailto:fot at autox.team.net http://www.fot-racing.com Donate:
> http://www.team.net/donate.html Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gasket.works at
> gte.net
> >
> > > _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/toodamnfunky at comcast.net
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20180628/12cedd03/attachment.html>
|