Also, Ken Gillanders used to sell them as a kit with the
sleeves for the TR-2/3/4 block.
John
On Tue, 14 Nov 2017 19:59:02 -0600, Tony Drews via Fot wrote:
They are commonly used in the TR-2/3/4 block in
place of stock lifters by using a sleeve - in
this case they are smaller than stock. If you
use the cam developed by Larry Young you can't
use those lifters as he needs the full diameter
of the stock lifter. The Elgin cams work OK with them though.
I'd not heard of using them in a TR-6 until now though.
Regards, Tony
At 01:02 PM 11/14/2017, Chuck Arnold and/or Kathleen Kelley via Fot wrote:
>Somewhere in a Triumph post I read about using
>what I think were referred to as GT40 liofters
>[tappets].? They are slightly larger in
>diameter than stock TR6 ones.? A set came with
>my car, but have never been used.? Does anyone
>know of there and the modification [or where I
>might have read about them?].? Also, they are for sale.
>
>Thanks,
>
>Chuck
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony at tonydrews.com
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|