Great info, very thorough.
John S
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Michael
Salter
Sent: Wednesday, June 21, 2017 11:10 AM
To: Jonathan Einhorn <einhornlawoffice at gmail.com>
Cc: healey list <healeys at autox.team.net>
Subject: Re: [Healeys] dumb transmission question
Hi Jonathan,
No dumb questions.......
The BN2 transmission is very similar to the 100/6. The bell housing is
different but interchangeable as the 100/6 uses an hydraulic clutch whereas the
BN2 clutch is mechanically operated.
The 1st motion shaft on the 100/6 is longer but can be cut down to allow use of
the transmission in a BN2.
The BN1 transmission, although completely different from a 100/6 could be
replaced by one if a BN2 bell housing and clutch were used and the input shaft
was shortened.
I think that is all of... others may have thoughts.
Michael S
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170621/f410e9e9/attachment.html>
|