Hi Steve,
As Tony said, install them and check the clearance. If you are using an
aluminum flywheel, then you will want to use washers, number 8s hard, Loctite
is a good idea too. With a steel flywheel, washers are not as important.
Loctite is still good when in doubt.
DH
----- Original Message -----
From: "STEPHEN BOROWSKI via Fot" <fot at autox.team.net>
To: "FOT List" <fot at autox.team.net>
Sent: Friday, June 2, 2017 1:27:49 PM
Subject: [Fot] TR4 ARP Flywheel Bolts Question
Does anyone have experience using the ARP flywheel bolts sold by Moss and
others?
I understand that you may have to shorten the bolt or it breaks the rear
seal???
Are they supposed to have a washer or not?
Thxs. Steve
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170603/addfda95/attachment.html>
|