G'day
Thank you for the responses to my question on the correct positioning of the
six-cylinder coil holding strap thingy.
While I am not 100% sure of the original location of the thingy on the BN3 I
decided that it would be easier to position it as the production
six-cylinder cars. Attached is a photo for those interested.
Hoo Roo
Patrick Quinn
Blue Mountains, Australia
From: Harold Manifold [mailto:manifold at telus.net]
Sent: Sunday, 21 May 2017 1:14 AM
To: 'Patrick & Caroline Quinn'; healeys at autox.team.net
Subject: RE: [Healeys] Coil Holding Strap Thingy
Patrick,
In the Austin Healey BN7 service parts manual the bolted connection is on
the engine side with the nut face up and the bolt head facing down. In
reality the right answer might be whatever the workers on the assembly line
preferred.
Regards,
Harold
_____
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Patrick &
Caroline Quinn
Sent: Friday, May 19, 2017 11:34 PM
To: healeys at autox.team.net
Subject: [Healeys] Coil Holding Strap Thingy
G'day
Simple question.
I have just refitted the generator to the BN3 and now wondering if the
six-cylinder coil holding strap thingy should have its join closer to the
engine side or the other side.
Thanks
Patrick Quinn
Blue Mountains, Australia
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170521/e0a911d8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5181.jpg
Type: image/jpeg
Size: 157528 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170521/e0a911d8/attachment.jpg>
|
