Not sure I understand the question, but, you want the coil to perch
more-or-less right on top of the generator. Here's a photo of my BJ8's
installation; not sure if it's exactly right as the rebuilder had to
remove the strap to work on the generator, but I think it's close. The
coil is just a wee bit off exactly vertical, away from the engine, but
I'm not going to remove the generator to 'fix' it, and it makes it a bit
easier to access the #1 plug.
Bob
On 5/19/2017 11:34 PM, Patrick & Caroline Quinn wrote:
>
> G?day
>
> Simple question.
>
> I have just refitted the generator to the BN3 and now wondering if the
> six-cylinder coil holding strap thingy should have its join closer to
> the engine side or the other side.
>
> Thanks
>
> Patrick Quinn
>
> Blue Mountains, Australia
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170520/687c8553/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator.JPG
Type: image/jpeg
Size: 120403 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170520/687c8553/attachment.jpe>
|