Why not use flexible brake hose with suitable fittings? The end can be
fitted somehow to the bulhead or whatever suitable place.
Kees Oudesluijs
Op 12-5-2017 om 12:32 schreef BJ8Healeys:
> I was fortunate to get his clutch bleeder extension for my BJ8 before Mr.
> Reid's untimely passing a few years ago. To my knowledge, no one is
> carrying on the production of these extensions, but it was the inspiration
> for my attempt just within the last week to reproduce the idea on my MG
> Midget. My local auto parts store was able to provide me with a pre-made
> hard line with fittings on each end to accommodate screwing into the bleeder
> threads on the slave cylinder, and to attach the bleed screw to the other
> end. It works fine to bleed that inaccessible bleed port on the cylinder
> from a point next to the clutch reservoir. The only problem is that the
> line is a copper alloy, which is susceptible to work hardening and fatigue
> cracking from vibrations from the engine, and is a bit too long. There is
> no convenient place on the Midget engine to secure the line after it leaves
> the slave cylinder and still provide access to the bleeder. The excess
> length required a few bends to accommodate it. It's still a work in
> progress, I think.
>
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> AHCA Delegate at Large
> Havelock, NC
>
>
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of
> ggilliam at usol.com
> Sent: Thursday, May 11, 2017 4:12 PM
> To: Healeys
> Subject: [Healeys] Clutch bleeder?
>
>
> A while back there was information on a bleeder line extension for the
> clutch slave cylinder...does anyone know the particulars of the
> construction, such as length and fittings required, a picture perhaps?
>
> Also, the side curtains for my Longbridge BN4 have just been laying in the
> boot for many years..would someone have a picture of the storage bag they
> should be held in? The front brackets on mine look home made..I'd like to
> see what they should really look like. Where the brackets removed for
> storage so the side curtains could lay flat together?
>
> Thanks for the help,
>
> Gordy
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs
> at chello.nl
>
>
>
|