Here's a shot of the business end. Sorry, not gonna pull my
transmission cover to get the other end ;) ... it's just a fitting into
the clutch slave. This was produced by the late Doug Reid, aka 'Mr.
Finespanner.' I think the best part was the simple but rugged bracket
that was bolted to the bellhousing.
Discussion here: http://www.ahexp.com/phorum/read.php?3,184927
Bob
On 5/11/2017 1:11 PM, ggilliam at usol.com wrote:
>
> A while back there was information on a bleeder line extension for
> the clutch slave cylinder...does anyone know the particulars of the
> construction, such as length and fittings required, a picture perhaps?
>
> Also, the side curtains for my Longbridge BN4 have just been laying
> in the boot for many years..would someone have a picture of the
> storage bag they should be held in? The front brackets on mine look
> home made..I'd like to see what they should really look like. Where
> the brackets removed for storage so the side curtains could lay flat
> together?
>
> Thanks for the help,
>
> Gordy
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/bspidell at comcast.net
>
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Bleeder.JPG
Type: image/jpeg
Size: 130527 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170511/1c6d9dde/attachment.jpe>
|