Hi Bill,
Yes. Very annoying!
Its ?? x 19 TPI. However, that thread form doesn?t exist.
It?s also 19 mm x 1.25 Pitch. But that thread form doesn?t exist either.
So it may be a cycle thread. Or something completely unique to these oil
pumps!?
Cheers.
From: Bill Tobin [mailto:william.tobin31 at verizon.net]
Sent: Monday, 10 April 2017 10:07 PM
To: Peter Vucinic; FOT
Subject: Re: [Fot] TR6 Oil Pump Pickup Thread
You're right about the different threads on the new ones.
I'll try and measure the threads if I can find a pump in my collection of
parts.
Cheers, Bill
----- Original Message -----
Sent: Monday, April 10, 2017 1:54 AM
Subject: [Fot] TR6 Oil Pump Pickup Thread
Any one on the list know what thread form etc. the oil pump strainer
tube/assembly is for the TR6?
It appears that the ?new? pumps have a different thread in them?
Picture attached
Many thanks
"You can Make a Small Fortune From Motor Racing. As long as You Started With
A Lage Fortune!"
Kind Regards
Peter Vucinic
TR4 - TR7 V8 - Spitfire MkII
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com <http://www.fot-racing.com/>
Archive: http://www.team.net/archive
_____
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/william.tobin31 at verizon.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170410/79e5b810/attachment.html>
|