fot
[Top] [All Lists]

[Healeys] Heat Shields

Subject: [Healeys] Heat Shields
From: healeybruce at roadrunner.com (Bruce Steele)
Date: Sun, 5 Mar 2017 07:32:50 -0800
References: <D50A3006-4D5E-4C4B-B929-26BCF440EDCC@gmail.com> <jl2mbcpdbgtdne3jrfvmku233f0rj5nbet@4ax.com>
Oh, and I would add that IMHO it is MUCH easier to buy the kit than try to
cut the cement board oneself.  I know I could not have done nearly as
precise a job with a sabre saw and drill.  Plus, my old ones were inaccurate
and poorly fabricated, and would have made really crappy patterns.  The kit
is well worth the cost.

Bruce Steele
Brea, CA
1960 BN7


-----Original Message-----
From: Bruce Steele [mailto:healeybruce at roadrunner.com] 
Sent: Sunday, March 05, 2017 7:29 AM
To: 'sentenac.rw at gmail.com' <sentenac.rw at gmail.com>; 'R. Lindsay'
<050.rpl at gmail.com>; 'Austin Healey list' <healeys at autox.team.net>
Subject: RE: [Healeys] Heat Shields

I just installed the Moss kit a couple of weeks ago.  Here are a couple of
in-progress shots of what they look like finished as described.  The kit
works very well.

Bruce Steele
Brea, CA
1960 BN7

-----Original Message-----
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of
sentenac.rw at gmail.com
Sent: Saturday, March 04, 2017 10:59 AM
To: R. Lindsay <050.rpl at gmail.com>
Cc: 'Austin Healey list' <healeys at autox.team.net>
Subject: Re: [Healeys] Heat Shields

It is a two-part refinishing process.  First part is two coats of Rustoleum
Clean Metal Primer 7780830.  Then you apply a very light coat of MinWax
Polyurethane Clear Satin to seal the surface and make it cleanable.  Both
are spray cans and each can contains enough for a dozen cars :-)  You don't
want the urethane to look shiny.  The instructions are included with Moss's
kit.  The primer is a nice off-white that Roger found to match the original
color.

-Roland
BN1 #724 with heat shields installed but not ready for the road

On Sat, 4 Mar 2017 12:24:51 -0500, you wrote:

>I recall someone mentioning that Roger Moment developed a finish to apply
to hardi board to make the finish like the original asbestos.  I've looked
through the archives and on John Simm's site and can't find the note.  Does
anyone know the finish he used or is there someone that can provide me with
a proper finish?
>
>Thank you in advance.
>
>Price Lindsay
>67 BJ8
>

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
$12.75
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/healeybruce at roadrunner.com



<Prev in Thread] Current Thread [Next in Thread>