Did not mention it but the stuff I refer to had the same "grid" pattern in it
like would appear if it were dried on a wire rack.
On 03/04/17, llennep at verizon.net wrote:
In 2000 or so I found material like the orig stuff. It came from a local
boiler supply house. Looked exactly like the orig. I merely cut it and covered
it with a few coats of a clear coat, not sure of its composition right now.
Turned out perfectly.
Keith
On 03/04/17, R. Lindsay <050.rpl at gmail.com> wrote:
I recall someone mentioning that Roger Moment developed a finish to apply to
hardi board to make the finish like the original asbestos. I?ve looked through
the archives and on John Simm?s site and can?t find the note. Does anyone know
the finish he used or is there someone that can provide me with a proper finish?
Thank you in advance.
Price Lindsay
67 BJ8
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|