Yep, that's the ticket:
https://www.bpnorthwest.com/triumph/tr3-tr4-tr4a/clutch-components/alloy-light-flywheel-tr2-tr3-tr4-tr4a.html
Currently out of stock though.
The aluminum one is available there and is not out of stock:
https://www.bpnorthwest.com/triumph/tr3-tr4-tr4a/clutch-components/aluminum-flywheel-tr2-to-tr4a.html
Regards, Tony
At 12:51 AM 3/24/2017, Charly via Fot wrote:
>I belive British Parts NW has them also.steel lightweight flywheels
>Charly Mitchel
>TR6 #44
>
>On Thu 23/03/17 8:49 PM , Tony Drews via Fot fot at autox.team.net sent:
> > Most folks seem to do a Fidanza aluminum flywheel. Joe had a set of
> > steel ones similar to what's sold by Cambridge made a while back,
> > weighs the same and doesn't have the tendency to come loose from the
> > crank like the alloy ones do. Looks like this but for a TR4:
> > http://www.cambridgemotorsport.com/partsxx/cm6953
> > I use a diaphragm pressure plate like you describe with a heavy duty
> > clutch disk.
> >
> > The annular hydraulic throwout bearing is cool, but if you have any
> > kind of failure you have to pull the tranny. For that reason I
> > converted from a very cool setup like that back to stock - so if the
> > slave cylinder went out I had half a chance of fixing it at the track.
> >
> > Regards, Tony Drews
> >
> > At 02:57 PM 3/23/2017, STEPHEN BOROWSKI via Fot wrote:
> > >Hello All,
> > >What do you recommend for a race flywheel,
> > Pressure Plate and Disk?>My existing is a lightened stock flywheel with a
> > diaphragm type >(Porsche) pressure plate.
> > >
> > >Also has anyone used the hydraulic throw out
> > bearing devise? Is it worth it?>
> > >Thanks,
> > >Steve
> > >FL TR4 racer
> > >
> > >_______________________________________________>fot at autox.
> > team.net>
> > >http://www.fot-racing.com>
> > >Donate: http://www.team.net/donate.html>Archive:
> http://www.team.net/archive>Forums:
>http://www.team.net/forums>Unsubscribe/Manage:
> > >http://autox.team.net/mailman/options/fot/tony at tonyd
> > rews.com
> >
> > _______________________________________________
> > fot at autox.
> > team.net
> > http://www.fot-racing.com
> > Donate: http://www.team.net/donate.htmlArchive:
> http://www.team.net/archiveForums:
>http://www.team.net/forumsUnsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/ch
> > arly at mitchelplumbing.com
> >
> >
> >
> >
>
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony at tonydrews.com
|